Spark & Fire Extinguishing

Spark Detectors

Vigi-Spark® System

Spark Detectors

Applications

SDN Spark Detector

Our SDN spark detectors are designed to monitor and register sparks in completely dark areas. This makes them highly suitable to monitor ventilation and material transport. Our SDN is manufactured with reliability and dependability in mind. That is why it is constructed from a single solid metal piece. Ensuring exceptional robustness and enabling it to withstand demanding industrial production environments.

SDD Spark Detector

Our SDD spark detectors are designed to monitor and register sparks in areas lit by daylight or electrical lights. This makes them highly suitable to monitor conveyor belts. Our SDD is manufactured with reliability and dependability in mind. That is why it is constructed from a single solid metal piece. Ensuring exceptional robustness and enabling it to withstand demanding industrial production environments.

Additional information

Control Unit

The Spark Detection and Extinguishing System is used as a preventive fire and explosion protection solution in industrial environments where sparks, hot particles, or embers can be generated and transported through ducts, conveyors, or material handling systems. The system continuously monitors for ignition sources and acts efore a fire or dust explosion can occur by detecting sparks early and triggering suppression actions. This makes it especially valuable for processes such as dust collectors, pneumatic conveying lines, silos, filters, and other areas where combustible dust or materials are present — protecting quipment, facilities, and personnel from damage and hazards.

The DC1 control unit is designed for installation in environments where explosive dust concentrations may occur.
Each DC1 unit can connect and control up to four spark detectors and two automatic extinguishing modules, allowing it to monitor one installation or two independent installations. The control unit features a two-step alarm and control logic.
Step 1 is activated when irregularities are detected, triggering immediate suppression and visual/audible alarms.
Step 2 is fully configurable, enabling automatic shutdown of ventilation, filtration, or production equipment according to user-defined safety requirements

System management

The DC1 is capable of managing :

  • Up to 4 SDN or SDD spark detectors
  • 2 automatic extinguishing units
  • Monitoring of heat tracing cables
  • Monitoring of water flow, pressure, and valve status

Technical information

Downloads

STUVEX Catalog

VIGI-SPARK Catalog

Would you like more information about this product?

"*" indicates required fields

Address*
*

Discover the range