The VIGISPARK Booster are designed to supply the Spark Detection and Extinguishing system with water in the calculated amount and with the calculated pressure to the water nozzles.
The Booster System contains :
The 150L Booster System is designed to support up to 3 sprinkler nozzles.
The 300L Booster System is designed to support up to 5 sprinkler nozzles.
The 500L Booster System is designed to support up to 7 sprinkler nozzles
The Spark Detection and Extinguishing System is used as a preventive fire and explosion protection solution in industrial environments where sparks, hot particles, or embers can be generated and transported through ducts, conveyors, or material handling systems. The system continuously monitors for ignition sources and acts efore a fire or dust explosion can occur by detecting sparks early and triggering suppression actions. This makes it especially valuable for processes such as dust collectors, pneumatic conveying lines, silos, filters, and other areas where combustible dust or materials are present — protecting quipment, facilities, and personnel from damage and hazards.
The DC1 control unit is designed for installation in environments where explosive dust concentrations may occur.
Each DC1 unit can connect and control up to four spark detectors and two automatic extinguishing modules, allowing it to monitor one installation or two independent installations. The control unit features a two-step alarm and control logic.
Step 1 is activated when irregularities are detected, triggering immediate suppression and visual/audible alarms.
Step 2 is fully configurable, enabling automatic shutdown of ventilation, filtration, or production equipment according to user-defined safety requirements
The DC1 is capable of managing :
"*" indicates required fields