Spark & Fire Extinguishing

Extinguishing Device SA1 – SA2 – SA3 – SA4

Vigi-Spark® System

Extinguishing Device SA1 – SA2 – SA3 – SA4

Applications

The Automatic Extinguisher SA1 – 4 is made of 5 parts: a nozzle, an electromagnet, a solenoid valve with high-speed opening technology, a stop valve and a filter. The Extinguisher’s operating pressure is between 5 and 10 bar. This secures an effective water barrier for extinguishing the sparks. The Auto Extinguisher is manufactured to cover all pipe or duct dimensions and shapes. An easy-tomount adaptor is included. All sprinklers are delivered with seperate solenoid valve, flow-switch, and a monitored lever-valve.

SA1

For up to 500 mm pipes

SA2

For up to 500-700 mm pipes

SA3

For up to 700-900 mm pipes

SA4

For over 900 mm pipes

Additional information

Control Unit

The Spark Detection and Extinguishing System is used as a preventive fire and explosion protection solution in industrial environments where sparks, hot particles, or embers can be generated and transported through ducts, conveyors, or material handling systems. The system continuously monitors for ignition sources and acts efore a fire or dust explosion can occur by detecting sparks early and triggering suppression actions. This makes it especially valuable for processes such as dust collectors, pneumatic conveying lines, silos, filters, and other areas where combustible dust or materials are present — protecting quipment, facilities, and personnel from damage and hazards.

The DC1 control unit is designed for installation in environments where explosive dust concentrations may occur.
Each DC1 unit can connect and control up to four spark detectors and two automatic extinguishing modules, allowing it to monitor one installation or two independent installations. The control unit features a two-step alarm and control logic.
Step 1 is activated when irregularities are detected, triggering immediate suppression and visual/audible alarms.
Step 2 is fully configurable, enabling automatic shutdown of ventilation, filtration, or production equipment according to user-defined safety requirements

System management

The DC1 is capable of managing :

  • Up to 4 SDN or SDD spark detectors
  • 2 automatic extinguishing units
  • Monitoring of heat tracing cables
  • Monitoring of water flow, pressure, and valve status

Downloads

STUVEX Catalog

VIGI-SPARK Catalog

Would you like more information about this product?

"*" indicates required fields

Address*
*

Discover the range